The circular saw a track system is a must-have tool if you want to make straight cuts using your circular saw. While many might think it is a complicated tool, the truth is otherwise. However, the structure of these guide rails varies from one manufacturer to another. So what you’ll buy depends on your needs.
Structure of Circular Saw Track System
Much as the structure may vary, some things remain primary to all of them. They include:
- Slide Coating: the slide coating is a feature on your circular saw that enables you to make smooth and accurate cuts because the saw will be able to slide more efficiently on a given surface or cut through.
- Non-Slip Rubber: this is a structure that you set under the rail. Its primary function is to hold the components of the track system in place. Thus, it prevents the aluminum rails from slipping as well as shifting the line of cut.
- Splinter Guard: usually, when you use a circular saw, its high rotating speed results in tearing of the edges of wood planks. This action leaves splinters at the end of cuts; they are sharp and rough. The splinter guard prevents splinters and tears from occurring; thus, resulting in a smooth cut.
- Guide Rib: typically, a circular saw tends to slip off its line while in use, which results in poor cuts. However, the guide rib prevents. How? Each circular has a guide plate that has a groove. The groove will lock into guide rib tightly to prevent the saw from slipping off the cutting line.
Even if you buy the best circular saw track system, and you do not know how to use it, chances are, you won’t get a perfect cut. So there are few things you need to put into consideration for you to get a straight and smooth cut.
Getting a Straight and Smooth Cut
- Adjust your circular saw and track system properly, i.e.; the fit must be flawless. The provided user manual directs you on how to get a perfect fit.
- Aligning the guide rail properly, especially for longer cuts. You can make use of connectors and ensure that the circular saw track system is aligned correctly before you make any cut.
- Getting the right measurements when installing the track system is another sure way of getting the cut right. Measure correctly both when fixing the first part and fitting the clamps.
- Always position your saw correctly before cutting.
As much as the best circular saw track system could guarantee you a straight cut, it is essential to apply other tips to get a perfect cut. When cutting longer planks, for instance, you’ll need extensions, and for others, you need to get the right measurements and position your saw right.